Product Information
Product Name | One Step Drug of Abuse Urine Test |
Model |
Intended Use | This series of products are intended for the qualitative detection of drug markers and their principal metabolites in human urine at specified cut-off level. |
Test Method |
▶ Cassette (1) Remove the device from foil pouch. (2) Using the specimen dropper, withdraw the urine sample from the specimen cup and slowly dispense 2 drops into the circular sample well. (3) Read results at 5-10 minutes. ▶ Dipcard (1) Remove the device from foil pouch. (2) Remove the cap to expose the sampling tips. With arrows pointing toward the urine specimen, immerse the sample tips vertically into the urine specimen for at least 10 seconds. (3) Replace the cap over the absorbent tip and lay the test device flatly on a flat surface. (4) Read results at 5 -10minutes. ▶ CUP (1) Remove the device from foil pouch. (2) Collect specimen in the cup. (3) Close the cup with the test lid, make sure the lid is closed tightly. (4) Place the cup on a flat surface. (5) Read results at 5-10 minutes. |
Interpretation of Results |
Positive: Only one red line appears in the control line (C) area, and there is no red line in the test line (T) area. Negative: Two red lines appear. One red line appears in the control area (C), and another red line appears in the test area (T). Invalid: No visible line appears at all, or no visible line in control line (C) area even though there is a red line in the test line (T) area. |